METRObility Optical Systems RADIANCE 10/100MBPS ACCESS OPTICAL NETWORK UNIT manual

the sender. FEF enables the Access Line Card in the central office to detect a break in the Access ONU’s fiber port receiver. The combination of these operations, along with the unit’s remote management feature, enable easy deployment of Ethernet services to customers.

The Radiance Access ONU provides the following key features:

•Compatibility with any 10Mbps or 100Mbps copper Ethernet device at the customer premise.

•Remote management through Metrobility’s innovative Radiance technology which enables communication between the central office and customer site.

•Complete Remote Monitoring (RMON) Group 1 Ethernet Statistics support.

•Remote link testing that does not affect the customer’s available bandwidth.

•Individual port enable/disable.

•Far End Fault to notify the central office of a link loss on the Access ONU’s fiber port receiver.

•Auto-negotiation on the copper port.

•Half and full duplex support on the copper port.

•10Mbps or 100Mbps support on the copper port.

•Link Loss Carry Forward (LLCF) and Link Loss Return (LLR) functionality to aid in troubleshooting.

•Integral singlemode fiber optic power monitors to measure the receive and transmit levels of the optical transceivers. (Models RA21-14, -16, -17 and -1J)

•Full signal restoration that allows for maximum segment length.

•Push-button MDI-II/MDI-X switch on the front panel to eliminate the need for crossover cables on the copper port.

•Optional wall mounting bracket.

•Full compliance with applicable portions of IEEE 802.3, 802.3u and 802.3x.

•Maximum transmission unit (MTU) size of 1535 bytes, which accommodates Q-over-Q (IEEE 802.1ad) VLAN tagging and MPLS labels.

Radiance 10/100Mbps Access Optical Network Unit 5