Paradyne SLM 5.5 manual OLCmd ldapmodify -D c=US -w admin -a -c data/new.ldif

A. OLCmd Reference

OLCmd ldapmodify

The ldapmodify command adds or modifes entries in the LDAP database. It accepts input from the STDIN stream.

Format:
OLCmd	ldapmodify [-DbindDN ] [-wpassword ] [-hhost ] [-pport ] [-F]
[-a -r] [-b] [-c] [-v]
Where:
-D	bindDN	Is the Distinguished Name (DN) used to bind to
		the directory.
-w	password	Is the database password.
-h	host	Is the name or IP address of the OpenLane
		management server.
-p	port	Is the port used to connect to the LDAP database.
-F		Specifies that all changes will be forced, even
		when input lines begin with replica:.
-a		Specifies that data is to be added. If neither -anor
		-ris specified, -ris presumed.
-r		Specifies data is to be replaced. If neither -anor
		-ris specified, -ris presumed.
-b		Specifies that any value starting with a forward
		slash (/) is the pathname of a binary file.
-c		Specifies that the command should continue
		execution even after an error.
-v		Specifies that debugging information should be
		returned.

Example:

The file new.ldif contains data for new database entries, in LDAP Data Interchange Format (LDIF). The following command adds the entries to the LDAP database:

OLCmd ldapmodify -D c=US -w admin -a -c < data/new.ldif

A-20 January 2002 7800-A2-GB32-00