Paradyne SLM 5.5 manual Adding a Customer Profile

6. Adding Devices and Customer Profiles

5.Modify fields as desired. Make sure Discovered circuits and endpoints is checked and click on Save and Sync.

6.Use the Device Browser or DSLAM Device Display to verify that the device is added properly and endpoints and circuits are discovered. See the OpenLane online Help for more information.

Adding a Customer Profile

Procedure

To create a new Customer Profile for Web-based report access:

1.Log in to the OpenLane system with the Customer ID of:

Admin

2.On the OpenLane Administration screen, select Customer Profiles.

3.Under Select a customer profile, enter a new Customer ID.

4.Under Select an action to perform on the customer profile, select Create a new customer profile.

6-4 January 2002 7800-A2-GB32-00