Paradyne 8540, 8546 manual Communications Controller MCC Card User’s Guide

Hotwire Menus and Screens

Levels of Access

There are two levels of privileges on the Hotwire DSL system. Your user accounts can be configured with a user name, password, and privilege of:

HAdministrator. The Administrator has complete read/write access to the DSL system. With Administrator permission, you can set specific parameters and variables to configure cards, ports, interfaces, and endpoint selection.

HOperator. The Operator has read-only access and can view configuration information and monitor performance but has no configuration menu access or modification permission.

The default access is no login and password with Administrator status. To provide login security to the DSL system, user accounts must be configured.

NOTE:

There must be at least one Administrator configured in order to have system security.

For information on configuring user accounts, see the Hotwire Management

Communications Controller (MCC) Card User’s Guide.

8000-A2-GB20-50 April 2000 2-5