Paradyne 8546 DSL Configuration Snmp Screens, Management System Source Validation for Radsl Cards

RADSL Card Configuration

DSL Configuration SNMP Screens

Use the system information submenu of the SNMP screens to configure SNMP security, community names, and trap addresses.

"Procedure

1.Follow this menu sequence: Configuration → SNMP (A-F)

2.The SNMP menu appears. Enter the desired value on the selected screen and field as shown in Table 3-6and press Enter.

Management System Source Validation for RADSL Cards

"Procedure

To set up management System source validation for RADSL cards:

1. Follow this menu sequence from the DSL Main Menu:

Configuration → SNMP → Security (A-F-A)

2.Enable IP address security validation.

3.Enter the IP addresses of up to five NMS managers that will permitted access to this DSL card.

Each card does not have to have the same set of managers as any other card or as the MCC.

4.Enter access permission to be granted each NMS system (ReadOnly(ro)/Read/Write(rw)/NoAccess(na)).

3-26 April 2000 8000-A2-GB20-50