Paradyne 8540 Snmp Options, Security Snmp Security, Communities/Traps Snmp Communities/Traps

Page 61

RADSL Card Configuration

Table 3-6. SNMP Options

Security (SNMP Security)

A-F-A

 

 

Enables you to configure security for the RTU SNMP agent.

CAUTION: Endpoint cookies must be kept confidential.

Endpoint Cookie – Security string for endpoint. Enter up to eight alphanumeric characters (Default = nosets). This cookie replaces the RTU RW community string when SNMP SET is restricted at the RTU.

Restrict SNMP SET at RTU on Port n (n = port 1-4) – Four SNMP security features to enable or disable SNMP sets for a specific endpoint. When this field is set to Enable, the endpoint cookie will be used by both the port card and the endpoint as the RW community string. Any external SNMP SET to the RTU (including the IP Injection Tool) will be denied due to community string mismatch. Automatic updates originating from the DSL port card will be the only SNMP sets accepted by the RTU. You must disable cookie security in order to make any changes to the RTU from the IP Injection Tool or any other SNMP manager.

Logical Entities (SNMP Logical Entities)

A-F-B

 

 

This screen displays information contained in the logical table of the Entity MIB. Make sure that the information you configure matches the community strings as configured on the RADSL cards. If only the RADSL card is set, the community string that the MCC card has in its entity MIB will not match.

HI (Index) – The index number of RADSL ports 1 to 4.

HT (Type) – Remote.

HLogical Descr. – Name you can assign to the RTU/customer for each port.

HRead Write Comm. – The community strings of the RTU attached to this port. It is used when the DSL system downloads configuration data to the RTU.

Communities/Traps (SNMP Communities/Traps)

A-F-C

 

 

Allows you to enable the Authentication Failure Trap Mechanism, stores SNMP Community string names for the DSL card, and stores NMS host IP addresses to which the RADSL card sends trap messages.

It also lets you configure four communities with three trap destinations each, for a total of up to 12 destinations.

Authentication Failure Trap – Enable to send a trap when a SNMP request community string does not match or when the password for a Telnet session is incorrect.

Community Name – SNMP community string name. You can enter up to 32 characters, and up to four unique entries per screen. Default names are public (ro), mcc (rw),

nms (rw), nms-2 (ro).

Access – Permission that is granted for each community. ReadOnly(RO)/ReadWrite(RW)/NoAccess(NA), up to four entries per screen.

IP Address – nnn.nnn.nnn.nnn format. Enter NMS system host IP address.

Input Number (port) – nnn format. Enter NMS system port number. (Default = 162 for traps.)

Send Traps – Set to E to enable. Set to D to disable.

8000-A2-GB20-50

April 2000

3-27

Page 60 Page 62
Image 61
Page 60 Page 62
Contents HOTWIREr 8540 and 8546 Radsl Cards Copyright E 2000 Paradyne Corporation All rights reserved Contents Radsl Card Configuration Glossary Index Contents Document Purpose and Intended Audience About This GuideProduct-Related Documents Document SummaryVii Viii What is the Hotwire DSL System? Hotwire DSL System DescriptionOptional Central Office CO Customer Premises CPInput Hotwire DSL ChassisApril DSL Card MCP Card Front View of a Hotwire 8820 GranDSLAM ChassisMCC Card Use this MCC Card This Hotwire ChassisRadsl Cards Levels of Access FeaturesSoftware Functionality Monitoring the DSL Cards Configuring the DSL CardsTroubleshooting and Diagnostics Hotwire DSL System Description Menu and Screen Formats Hotwire Menus and ScreensComponents of a Hotwire Menu Luserlogin or Ruserlogin where L indicates a local login Components of a Hotwire ScreenKeys Definition Commonly Used Navigation KeysCommunications Controller MCC Card User’s Guide User Login Screen Hotwire Chassis Main Menu Hotwire Menu HierarchyHotwire Chassis Hotwire DSL Hotwire DSL MenuDiagnostics ApplicationsDSL Card Configuration Menu DSL Card Monitoring Menu Logging In to the SystemCard Selection Screen R D U X X Column Position Display Description HeadingExiting From the System Accessing the Hotwire DSL MenuManually Logging Out Automatically Logging OutHotwire Menus and Screens Overview Radsl Card ConfigurationPort Naming Conventions For each Service Domain See Perform task Configuring the MCC Card, DSL Cards, and RTUsFor the Management Domain, perform task On the . . . See Server 10BT DCE Manager Router DCE ManagerMCC Card CardDCE Manager Router DCE Manager Server8546 ISP Router8540 DSL Configuration Card Status Screens Card Status Options 1 DNS Setup Configure DNSCard Info System Information Time/Date Card Status Options 2Nvram Clear Screen Clear Nvram Card Reset Reset System Nvram Config LoaderCard Status Options 3 DOS MachineDownload Code Download Code and Apply Download Card Status Menu Options 4Apply Download Ports Options 1 DSL Configuration Ports ScreensEthernet Port DSL Ports DSL Parameters Ports Options 2DSL Ports DSL Parameters cont’d Ports Options 3Thresholds for Trap Messages Interfaces Options 1 DSL Configuration Interfaces ScreensGeneral Interfaces IP Network Interfaces Options 2Control Control Interface Interfaces Options 3 Echo Policy Default =Negotiate Options Link OptionsDSL Configuration Users Screens Users Options Users * Configure AccountDSL Configuration IP Router Screens Message Meaning Static Routes IP Router Options 1Martian Networks IP Router Options 2Filter Table IP Router Options 3 IP Router Filters IP Filter ConfigurationDelete Rule Yes/No IP Router Options 4 Management System Source Validation for Radsl Cards DSL Configuration Snmp ScreensSecurity Snmp Security Snmp OptionsCommunities/Traps Snmp Communities/Traps DSL Configuration Dhcp Relay Screens Select Configuration → Dhcp Relay → Domain Names A-G-A Configuring Dhcp Relay Agent dynamic addressingDomain Names Dhcp Relay OptionsInterface IP Address Read-only ServersDSL Configuration RTU Screens RTU Selection RTU OptionsDSL Monitoring Menu Monitoring the Hotwire DSL SystemDSL Monitoring Card Status Screens Card Status Options Login HistoryCard Info General Card Information DSL Monitoring Physical Layer Screens Active List Active Ports List Physical Layer Options 1Ether Statistics Ethernet Statistics Hdlc Bus Stats Hdlc Bus Statistics Physical Layer Options 2DSL Link Perf DSL Link Performance Summary Physical Layer Options 3DSL Perf Stats DSL Performance Stats Physical Layer Options 4All Data Customer DataPhysical Layer Options 5 DSL Error StatsDSL Xmit Status DSL Transmit Stats DSL Monitoring Interfaces Screens Active List Active Interfaces List Monitor Interfaces OptionsStatus Interface Status Monitoring → Network Protocol B-D DSL Network Protocol ScreensSocket Statistics Network Protocol Options 1UDP Statistics TCP Data Stats TCP Data Statistics Network Protocol Options 2TCP Connection Statistics Network Protocol Options 3IP Statistics Icmp Statistics Icmp Packet Statistics Network Protocol Options 4Snmp Statistics Network Protocol Options 5Hdlc Statistics Hdlc Statistics Network Protocol Options 6PPP Stats General H a Network Protocol Options 7LCP Stats PPP H B Ipcp General Stats PPP H CDSL IP Router Screens Routing Table Screen Routing TableRoute Information Window ARP Table DSL Configuration RTU Screens RTU Information Applications Screens Diagnostics and TroubleshootingApplications Options Ping IP SettingsTraceRoute Diagnostic Screens Alarms Card Alarms Diagnostics OptionsSelftest Packet Echo TestChecking Alarms TroubleshootingMajor Alarms 1 Failure Type Action No Response at StartupEthernet port 1. Check cable connections to the DSL chassis Major Alarms 2 Failure Type ActionDSL port RespondingMargin Minor Alarms 1 Failure Type ActionThreshold Error Rate Minor Alarms 2 Failure Type ActionLink Down Example Syslog Messages Syslog MessagesExample 3. System Status Message Network Problems 1 Action Network ProblemsInterfaces A-C Network Problems 2 ActionMonitoring the Hotwire DSL System Network Problems 3 ActionDiagnostics and Troubleshooting Download Code Apply Download Download CodeFully Operational System Scenario Two Download Only SystemDSL Snmp Community Strings and Authentication Failure Trap Setting Up Snmp Trap FeaturesSnmp Traps Enable DSL Port Traps Table B-1. DSL Card Traps 1 Event Severity Comment Trap # DSL Card TrapsSnmp Traps XDSL margin low Minor Table B-1. DSL Card Traps 4 Event Severity Comment Trap # Standard Traps RTU Related TrapsEnterprise-Specific Traps Table B-2. Standard Traps Event Trap Class CommentSnmp Traps Hotwire 5446 RTU Setup Overview RTU SetupFigure C-1. IP Routing Table Example IP Injection Type IP Address Network Mask Next Hop RouterDownloading the IP Injection Tool Accessing the Hotwire 5446 RTU IP Injection MIBAccessing the IP Injection Tool Community String Entries Additional pdn-common MIBs Supported IP and Device MIBs SupportedConfiguration Requirements Network Management Systems From an Snmp workstation Using a MIB BrowserMIB Browser Techniques ProceduresIP Injection Tool Group Objects Table Viewable 5446 RTU ARP Table Glossary Ethernet address EthernetFilter Gateway addressManager OpenLane DCEPacket Pots splitterTerminal emulation TelnetTraceRoute UpstreamNumbers IndexIN-2
Related manuals
Manual 161 pages 59.8 Kb Manual 12 pages 4.86 Kb
Top Page Image Contents