Paradyne 4000E installation instructions Installing Your Interface Modules

Page 7

MANAGEMENT MODULE

Slot Module Guides

3.Slide the Management Module Firmly into the Chassis. Tighten the fastening screws on the management module faceplate.

Fastening Screws

Installing Your Interface Module(s)

Interface modules provide the subscriber connections for a 4000E BLC; up to four interface modules may be installed in the 4000E (in slots 1–4). There are a variety of models available for purchase. Refer to www.paradyne.com for further information or contact your sales representative. Any combination of interface module models may be installed in an 4000E as long as they are supported by the model type and version number of your management module; refer to the Release Notes for your particular management module model.

CAUTION

If a slot cover is removed from slots 2–4, it must be replaced with an uplink module. DO NOT OPERATE A 4000E WITH AN EMPTY MODULE SLOT.

IPD4-A2-GZ40-10

July 2005

7

Image 7
Contents Software and Firmware License Agreement ContentsJuly IPD4-A2-GZ40-10 Unpacking and Inspecting the Equipment IntroductionInstallation on a Tabletop Installation OptionsInstallation in a Rack Installing a Management Module Installing Your Management ModuleInstalling Your Interface Modules Interface Module Powering Up Your 4000E BLC DC Power Terminal DC Power Subscriber Lines Uplink ConnectionsInterface Module B Interface Module a Connectors July IPD4-A2-GZ40-10 Configuration and Management Securing the Connecting CablesFan Module Product Documentation Online SpecificationsImportant Safety Instructions United States EMI Notice Canada EMI Notice Warranty, Sales, Service, and Training Information
Related manuals
Manual 20 pages 48.14 Kb