Paradyne 4000E installation instructions Interface Module

Page 8

Procedure

1.Select a Slot for Installation.

Although the 4000E is factory shipped with Slot 1 open, interface modules may be installed in any slot, 1–4.

2.Align the interface module with the slot module guides. With the interface module PCB facing up and the interface module model name on the right side of the module faceplate (facing towards you), align the left and right edges of the PCB with the slot module guides of the chosen slot on the 4000E.

Slot Module Guides

INTERFACE MODULE

3.Slide the interface module fFirmly into the chassis. Tighten the fastening screws on the interface module faceplate.

Fastening Screws

8

July 2005

IPD4-A2-GZ40-10

Image 8

Contents Contents Software and Firmware License AgreementJuly IPD4-A2-GZ40-10 Introduction Unpacking and Inspecting the EquipmentInstallation Options Installation on a TabletopInstallation in a Rack Installing Your Management Module Installing a Management ModuleInstalling Your Interface Modules Interface Module Powering Up Your 4000E BLC DC Power Terminal DC Power Uplink Connections Subscriber LinesInterface Module B Interface Module a Connectors July IPD4-A2-GZ40-10 Securing the Connecting Cables Configuration and ManagementFan Module Specifications Product Documentation OnlineImportant Safety Instructions United States EMI Notice Warranty, Sales, Service, and Training Information Canada EMI Notice

Related manuals

Manual 20 pages 48.14 Kb