Paradyne 12000E installation instructions Specifications Criteria

Page 20

Specifications

Table 1. Specifications

Specification

Criteria

 

 

Environment

Operating Temperature:

 

–40° F to 149° F (–40° C to 65° C)

 

Storage Temperature:

 

–40° F to 158° F (–40° C to 70° C)

 

Humidity:

 

5 % to 95 %, non-condensing

 

Altitude:

 

–200 ft to 16,500 ft (–60 m to 5,000 m)

 

 

Physical

15.75" High x 17" Wide x 18" Deep

 

(40 cm High x 43.2 cm Wide x 46 cm Deep)

 

47 lbs (21.4 kg)

 

 

Power

–48 VDC

 

30 amps maximum

 

Although actual power draw depends upon chassis

 

configuration, a fully loaded chassis averages around

 

15 amps.

 

 

Regulatory Compliance

NEBS:

 

GR-63-CORE; GR-1089-CORE

 

EMC:

 

FCC Part 15; CSA/C108.8; EN55022; EN55024

 

Safety:

 

CSA 22.2 No. 60950-1-03; EN60950-1:2001; CE

 

Marking

 

Telecom:

 

ACTA968 (Part 68); ICCS-03; TBR12; TBR13

 

 

20

July 2005

IPD1-A2-GZ40-10

Image 20
Contents Contents Software and Firmware License AgreementJuly IPD1-A2-GZ40-10 Introduction Unpacking and Inspecting the EquipmentInstallation Options Installation on a TabletopInstalling in a Rack Installing Your Management Module Installing a Management ModuleManagement Module Slots Management Module Installing Your Interface Modules July IPD1-A2-GZ40-10 Powering Up Your 12000E DC Terminal Block DC Power Terminal Establishing Your Uplink Connections Connecting Your Subscriber Lines Female RJ21 Connector a For Interface Module Slot IPD1-A2-GZ40-10 July Configuration and Management Product Documentation OnlineFan Module Specifications Specifications CriteriaImportant Safety Instructions United States EMI Notice Warranty, Sales, Service, and Training Information Canada EMI NoticeIPD1-A2-GZ40-10