Paradyne 12000E installation instructions Management Module

Page 8

2.With the management module printed circuit board (PCB) facing right and the management module model name upright, align the upper and lower edges of the PCB with the slot module guides.

MANAGEMENT

MODULE

Slot Module Guides

3.Slide the management module firmly into the chassis. Tighten the fastening screws on the management module faceplate.

Fastening Screws

July 2005

IPD1-A2-GZ40-10

Image 8

Contents Contents Software and Firmware License AgreementJuly IPD1-A2-GZ40-10 Introduction Unpacking and Inspecting the EquipmentInstallation Options Installation on a TabletopInstalling in a Rack Installing Your Management Module Installing a Management ModuleManagement Module Slots Management Module Installing Your Interface Modules July IPD1-A2-GZ40-10 Powering Up Your 12000E DC Terminal Block DC Power Terminal Establishing Your Uplink Connections Connecting Your Subscriber Lines Female RJ21 Connector a For Interface Module Slot IPD1-A2-GZ40-10 July Configuration and Management Product Documentation OnlineFan Module Specifications Specifications CriteriaImportant Safety Instructions United States EMI Notice Warranty, Sales, Service, and Training Information Canada EMI NoticeIPD1-A2-GZ40-10