Paradyne 12000E installation instructions Installing in a Rack

Page 5

Installing in a Rack

Procedure

1.Using a Phillips screwdriver, attach the two provided rack mount brackets to the sides of the 12000E with eight of the ten provided bracket screws. There are seven position options for the rack brackets; position them as best suited to the space available for your chassis on the rack being utilized.

	12000E SIDE VIEW	RACK MOUNT
	12000E SIDE VIEW	BRACKET
		BRACKET

Front

Rear

IPD1-A2-GZ40-10

July 2005

Image 5

Contents Software and Firmware License Agreement ContentsJuly IPD1-A2-GZ40-10 Unpacking and Inspecting the Equipment IntroductionInstallation on a Tabletop Installation OptionsInstalling in a Rack Installing a Management Module Installing Your Management ModuleManagement Module Slots Management Module Installing Your Interface Modules July IPD1-A2-GZ40-10 Powering Up Your 12000E DC Terminal Block DC Power Terminal Establishing Your Uplink Connections Connecting Your Subscriber Lines Female RJ21 Connector a For Interface Module Slot IPD1-A2-GZ40-10 July Product Documentation Online Configuration and ManagementFan Module Specifications Criteria SpecificationsImportant Safety Instructions United States EMI Notice Canada EMI Notice Warranty, Sales, Service, and Training InformationIPD1-A2-GZ40-10