9.Upon such termination, the Licensee shall refrain from any further use of the Software and destroy the original and all copies of the Software in the possession of Licensee together with all documentation and related materials.
10.This Agreement shall be governed by the laws of the State of Florida, without regard to its provisions concerning conflicts of laws.
Introduction
Paradyne's 12000E IP Broadband Loop Carrier (BLC) provides a high capacity and native IP Ethernet foundation for a variety of
The 12000E BLC is engineered for efficient,
The 12000E BLC supports single or dual redundant uplink, management, and switching modules. In redundant mode, both modules can be connected to the dual backplanes with redundant modular backhaul/uplink ports to support 10/100 Ethernet, GigE (Copper or fiber), T1/E1, and dual bonded T1/E1 uplink modules.
For flexibility of installation the 12000E has removable mounting brackets that can be placed in increments of 1.45” up to 9.28” from the front of the chassis, allowing for multiple installation options in either 19" or 23" equipment racks.
Unpacking and Inspecting the Equipment
HANDLING PRECAUTIONS FOR !
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative.
The following components should be included in the shipping container:
1 – 12000E with 1 fan module and 12 slot covers
4 – Rubber Bumper Screws
2 – Rack Mount Brackets (either 19" or 23", as ordered)
10 – #6 Phillips Bracket Screws
8 – #10 Phillips Rack Screws
8 – #12 Phillips Rack Screws
July 2005 | 3 |