Paradyne 9783 installation instructions Configuration Setup

Configuration Setup

Once the router is installed, it can be accessed locally through the menu-driven user interface via an asynchronous terminal or PC connection, or remotely via a Telnet session, and the router’s interfaces can be provisioned. The following provisioning can Tbe set up:

Frame relay, ATM, and physical layer provisioning – Typically set up by the CLEC (Competitive Local Exchange Carrier) using the menu-driven user interface via an ASCII terminal or PC running a terminal emulation program, or a Telnet session.

Router provisioning, using the CLI – Typically accessed by the frame relay

Tservice provider providing managed router service, or by the end user.

SLM provisioning – Typically set up by the frame relay service provider or the CLEC.

As soon as the router’s COM port is connected to a terminal or PC, the menu-driven user interface can be accessed. The terminal or PC’s configuration must be compatible with the router’s COM port settings.

12