Checking PVC Connections
Check PVC connections to verify that all PVCs, including management PVCs, are configured and active.
Procedure
To verify PVCs:
1.Select PVC Connection Status from the Status menu.
The PVC Connection Status screen shows all PVC connections, the interface source and DLCI number of the incoming data linked to the interface, and DLCI number for the outgoing data. You can also see whether the PVC is active.
2.Verify that each PVC is active.
—If active, the router should be passing data.
—If not active, no data traffic can be carried by the PVC. If the PVC is configured correctly, the circuit may be down.
Provisioning the Router Interface
The FrameSaver DSL 9783 Router defaults to bridge mode. Routing without bridging, and simultaneous routing and bridging, are also options.
Use the bridge command from the router’s CLI to configure the bridge and routing attributes. Also, enter an Ethernet IP address and a DHCP IP address. Refer to the Quick Reference for a summary of configuration options, CLI commands, and default settings.
20