Paradyne 9783 installation instructions Power-On, System OK green Alarm red, Ethernet Port green

5.Insert the supplied power cord’s round end into the jack labeled POWER. Plug the transformer into an AC outlet.

Install the supplied tie wrap for strain relief, as shown.

Grounded

Power Tie

Outlet Wrap

POWER

Power

Jack

COM

ETHERNET

NET

R

R

FrameSaver® SLVDSL

TM®

SDSL

	97839783ROUTER-C
OK	ALM	TEST ATM	DSL

System Networkrk

OK

Port

01-16877-01

Installation of the hardware is now complete. When the power cord is installed, the router goes through a power-on self-test.

Power-On

When power is applied, the router performs self-diagnostics and the PWR LED is on. The self-diagnostics include a power-on self-test where all of the LEDs are on.

System OK – green

Alarm – red

Test – yellow

ATM – green/yellow

DSL – green

Ethernet Port – green

R 9783 ROUTER

OK ALM TEST ATM DSL OK

FrameSaver® SLVDSL

SDSL System Network Port

01-16857-01

Refer to Status LEDs on page 10 for information about the LEDs. Refer to Troubleshooting on page 11 for LED indications requiring action.

9