1752 and 1754 SHDSL Router User’s Guide
•Configure Intrusion Detection settings
Via the Advanced menu, click on Security and then the following page is displayed:
Enabling Security
You must enable Security before you can enable Firewall and/or Intrusion Detection. In the Security State section:
1.Click on the Security Enabled radio button.
2.Click on to update the Security State section.
Enabling Firewall and/or Intrusion Detection:
You must create a security interface before you can enable Firewall and/or Intrusion Detection.
Once you have created a security interface:
1.Click on the Firewall Enabled and/or Intrusion Detection Enabled radio buttons.
2.Click on to update the Security State section.
Setting a default security level:
You must have Security and Firewall enabled in order to set a default Security level.
1.From the Security Level section, click on the Security Level
2.Click on the level that you want to set: none, high, medium or low.
June 2005 | 53 |