1752 and 1754 SHDSL Router User’s Guide
10 and 100,000 seconds. The default value is 300 seconds. If to change the filter age,
input the seconds desired in the filter age field, and then clock on 
to submit your setting.
11.Traffic Class setting which is the status of traffic class mapping. If to set traffic class,
select your option from the 
to submit your setting. The following table gives the range of values for each option which can be specified with this command and a default value.
Option | Description |
| Default value |
enable | Enable the mapping of regenerated |
|
|
| priority to its traffic class. |
|
|
|
|
|
|
disable | Disable the mapping of regenerated |
| disable |
| disable priority to its traffic class. |
| |
|
|
| |
prioritybased | Traffic class mapping would happen only if |
|
|
| traffic class has not been already set. |
|
|
|
|
|
|
VLAN configuration
Following figure displays the VLAN settings for the bridge.
The following VLAN information is displayed:
1.VLAN version: IEEE 802.1q version number that this device supports, which is 1.
2.Max VLAN Id: The maximum VLAN Id for a VLAN in the bridge.
3.Max VLANs: The maximum number of VLANs supported in the bridge.
4.Current VLANs: The number of VLANs that are currently existing in the bridge.
Spanning bridge configuration
Following figure displays the spanning bridge settings for the bridge.
66 | June 2005 |