Paradyne 1754 manual Conexantconexantconexant

Page 81

1752 and 1754 SHDSL Router User’s Guide

Input the values on the fields respectively. The following table gives the range of values for each option, which can be specified with this command.

	Option	Description

	Interface name	Name of the interface
	Policy name	Name of the IPsec policy previously created.

	Encry Key	Encry Key is a cryptographic key for an encryption.
		algorithm.The key requirements for specific algorithms are as
		follows:
		DES - 64 bit(8 characters) e.g. conexant.
		3DES - 192 bit(24 characters) e.g.
		conexantconexantconexant
	Auth Key	Auth Key is a cryptographic key for an authentication.
		algorithm.algorithm.The key requirements for specific
		algorithms are as follows:
		SHA1 - 160 bit(20 characters) e.g.
		conexantconexantconexantcone.
		MD5 - 128 bit(16 characters) e.g. conexantconexant
	Direction	Specifies the direction in which the SA is applicable.

	Sa Mode	Tunnel or transparent mode selectable

	Protocol	Specifies that this SA is being created for the authentication
		header protocol. esp Specifies that this SA is being created for
		the encapsulation security payload protocol.

1752-A2-GB20-00		June 2005	81

Image 81

Contents 1754 Shdsl Routers Warranty, Sales, Service, and Training Information Important Safety Instructions EMI Notices JapanUnited States EMI Notice Canada EMI NoticeActa Customer Information Contents Configuring the Router Using EmWeb Diagnostic and Troubleshooting Series Overview FeaturesApplications SpecificationsLED Front Panel LED and Rear Panel description Hardware Setup and StartupRestore Factory Defaults/Reboot Button DSL Connectors DescriptionParts check Hardware Connection Model RJ45 RJ11 Switch Internet Windows XP Configuring Windows PCsJune Windows Me WindowsSelect Network Protocol dialog box appears Windows 95Windows NT Mac OS Configuring Apple PCsMac OS 8.x or About EmWeb pages Accessing EmWebStatus Pages Physical port connection status System status1754 Shdsl Router User’s Guide 1754 Shdsl Router User’s Guide Wire Pair DSL Pair to Use Illustration 1754 Shdsl Router User’s Guide Bridge/Router Interfaces Event Log System informationWAN Connection Setup pagesEditing a WAN service Creating a WAN serviceLAN Setup Deleting a WAN serviceCreating a virtual interface routed services only LAN connections Configuring primary and secondary LAN connectionsCreating virtual interfaces Enabling/disabling the Dhcp server Dhcp ServerCreating a Dhcp server subnet Editing a Dhcp Subnet Creating a Fixed Host Enabling/disabling Dhcp relay Dhcp RelayEditing/deleting entries in the Dhcp relay list Configuring DNS serversDNS Client DNS RelayConfiguring the DNS relay list Synchronize Client with NTP Server Sntp ClientConfigure Sntp Client Mode Configure SNTP-NTP ServerSetting the System Clock System Pages Quick SetupBackup/Restore Firmware UpdateRestoring your configuration Save configurationRestart Router Editing or Deleting a Login Account AuthenticationSecurity Advanced PagesEnabling Firewall and/or Intrusion Detection Enabling SecurityNAT Configuring security interfacesConfiguring NAT Global Addresses Configuring NAT1754 Shdsl Router User’s Guide Configuring NAT Reserved Mapping Configuring Firewall Policies Configuring validators Configuring Triggers Configuring Intrusion Detection Settings 1754 Shdsl Router User’s Guide Editing a route IP RoutesDeleting a route Creating an IP V4 RouteBridge Global Bridge Configuration Spanning bridge configuration Vlan configurationPvid Interface ConfigurationPriority map configuration Default value 1754 Shdsl Router User’s Guide Vlan ID Edit Tagged PortsCreate a new Vlan Edit untagged Ports1754 Shdsl Router User’s Guide VPN Status VPNField Description Field Description SPI Create a new IPSec selector Edit IPSec ConfigCreate IPSec Interface Create IPSec SA Conexantconexantconexant Des Snmp Ports Wire Mode DSL Pair to Use Illustration Diagnostic and Troubleshooting