Paradyne 1754 manual Wire Mode DSL Pair to Use Illustration

1752 and 1754 SHDSL Router User’s Guide

Wire Mode	DSL Pair to Use			Illustration
2-Wire Mode	1
4-Wire Mode	1,2				DSL
6-Wire Mode	1,2,3
		1	2	3		4
8-Wire Mode
	1,2,3,4

3.Click on the Line Probe drop-down list to set line probe as enable or disable.

4.Click on the Annex drop-down list to select the desired annex mode: A, B, A&B, F, G, or F&G.

5.Click on the PSD drop-down list to set PSD as symmetric or asymmetric.

6.To set the maximum and minimum line rate, click on the Max Line Rate and Min Line Rate drop-down list respectively (200 kbps to 5704 kbps).

7.To set the target margin, input the desired number in the target margin field (range: –6 to 21 dB).

8.Click on to submit your setting or to clear your setting.

9.To view the advanced status of SHDSL and Ethernet ports, refer to the system status screen:

1752-A2-GB20-00 June 2005 85