Paradyne 1754 manual Default value

1752 and 1754 SHDSL Router User’s Guide

Option	Description	Default value
Priority 1	The regenerated user-priority to which the user	1
	priority with value 1 in the incoming frame should
	be mapped.
Priority 2	The regenerated user-priority to which the user	2
	priority with value 2 in the incoming frame should
	be mapped.
Priority 3	The regenerated user-priority to which the user	3
	priority with value 3 in the incoming frame should
	be mapped.
Priority 4	The regenerated user-priority to which the user	4
	priority with value 4 in the incoming frame should
	be mapped.
Priority 5	The regenerated user-priority to which the user	5
	priority with value 5 in the incoming frame should
	be mapped.
Priority 6	The regenerated user-priority to which the user	6
	priority with value 6 in the incoming frame should
	be mapped.
Priority 7	The regenerated user-priority to which the user	7
	priority with value 7 in the incoming frame should
	be mapped.

3.Regenerated Priority to traffic class map, as shown in the following figure, specifies the mapping of regenerated priority to their traffic class values.

The following table gives the range of values for each option which can be specified with this command and a default value.

	Option	Description		Default value
	Priority 0	The traffic class to which the regenerated priority of		0
		value 0 is mapped.
	Priority 1	The traffic class to which the regenerated priority of		1
		value 1 is mapped.
	Priority 2	The traffic class to which the regenerated priority of		2
		value 2 is mapped.
	Priority 3	The traffic class to which the regenerated priority of		3
1752-A2-GB20-00		June 2005	69