Before removing a SSP-100 from its PCMCIA socket, the Enabler should be executed to free the system resources allocated when the card was installed. For this operation the Enabler provides on additional command line option:
Rinstructs the enabler to release the resources previously allocated to the SSP-100. When the 'R' option is used, any settings specified by the 'B', and 'I' options are ignored. The BIOS equipment list WILL NOT be cleared of the SSP-100 upon execution of the release command.
2.2.1.1 Example 1
SSP100EN
In example 1, no command line argument is specified. The Enabler will report an error and display the proper usage of the command.
2.2.1.2 Example 2
SSP100EN (s0,b300,i5)
In example 2, the Enabler will configure the SSP-100 in socket 0 with a base address of 300H and IRQ 5 using a configuration memory window at segment D000.
2.2.1.3 Example 3
SSP100EN (i10,b340,s1)
In example 3, the Enabler will configure the SSP-100 in socket 1 with a base address of 340H and IRQ 10 using a configuration memory window at segment D000.
SSP-100 User’s Manual | 2-10 |