Quatech SSP-100 user manual Command Line Options, Ssocket

Page 12

version of Card and Socket Services must be installed on the system or the SSP-100 Enabler program must be used to configure the adapter. If the Client Driver reports the desired adapter configuration, the installation process is complete and the SSP-100 may be removed and/ or inserted from the system as desired. On each insertion into the PCMCIA socket, the SSP-100 will be automatically reconfigured according to the command line options.

2.1.2 Command Line Options

The SSP-100 Client Driver accepts up to eight command line arguments from the user to determine the configuration of the SSP-100. If any arguments are provided, the Client Driver will attempt to configure any SSP-100 with the options specified in the order they are entered on the command line. Each argument must be enclosed in parenthesis and must be separated from other arguments by a space on the command line. Within each argument, any or all of the following parameters may be specified using a comma (no spaces) to separate each parameter:

Ssocket

specifies which PCMCIA socket the SSP-100 must be inserted into for this

 

configuration argument to be used. socket must be in the range 0 - 15. If this

 

option is omitted, the configuration argument will apply to SSP-100 inserted

 

into any socket

Baddress

specifies a the base I/O address of the SSP-100 in hexadecimal. This address

 

must reside on an even 8-byte boundary. If this option is omitted, a base

 

address will be assigned by Card and Socket Services. The “A” switch must

 

not be used when using this command.

Iirq

specifies the interrupt level (IRQ) of the SSP-100 in decimal. irq must be one

 

of the following values: 3, 4, 5, 7, 9, 10, 11, 12, 14, 15, or 0 if no IRQ is desired.

 

If this option is omitted, an interrupt level will be assigned by Card and

 

Socket Services. The “A” switch must not be used when using this

 

command.

Ebios

specifies which location the configured SSP-100 will be placed in the BIOS

 

equipment list. Valid numbers are 1-4. If this option is omitted, the SSP-100

 

will not appear in the BIOS equipment list. If no number is specified, the

 

SSP-100 will be placed in the next available location in the BIOS equipment

 

list. The “A” switch must not be used when using this command.

Acom

specifies which Logical COM port the SSP-100 will be configured. Valid

 

COM port numbers would be 1-4. The BIOS Equipment list will be

 

automatically updated, so the E command is not required when using this

SSP-100 User’s Manual

2-3

Image 12
Contents SSP-100 Page Page Warranty Information Declaration of Conformity Table of Contents Page Introduction This page intentionally left blank DOS / Windows 3.x Installation Client Driver Installation SSP-100 Client Driver for DOSCommand Line Options SsocketDevice = C\SSP-100\SSP100CL.SYS Device = C\SSP-100\SSP100CL.SYS b300,i5 Device = C\SSP-100\SSP100CL.SYS s0,b300,i5 s1,b340,i10 Common Problems Generic Client DriversSSP-100 Enabler for DOS Option is not used SSP100EN SSP100EN s0,b300,i3,wd8 SSP100EN s0,a3 Memory Range Exclusion This Page Left Intentionally Blank SSP-100 User’s Manual Windows 95, 98, 2000, ME, NT Installation Installing a SSP-100 Under Windows 95, 98, MEPage Windows 2000 New Hardware Wizard SSP-100 User’s Manual SSP-100 Resource Settings in Windows Viewing Resource Settings with Device ManagerWindows 95, 98,ME Device Manager SSP-100 User’s Manual Windows 2000 Device Manager Changing Resource Setting with Window 2000 Device Manager Windows 95,98,ME Resource Allocation SSP-100 User’s Manual Page Page Basic Configuration List Not Available Installing SSP-100 under Windows NT Page Page Page Installing Quatech Pcmcia Cards under Windows CE Windows CEPage Page OS/2 Installation Configuring With System Assigned Resources Configuring With User Assigned ResourcesDEVICE=C\SSP-100\SSP100.SYS 3,100,5 Advanced Configuration Topics OS/2 Plug and Play GUI with properly configured SSP-100 Monitoring The Status Of Pcmcia CardsThis Page Left Intentionally Blank External Connections SSP-100 Adapter CableThis page intentionally left blank Specifications SSP-100