Quatech SSP-100 user manual Windows 95, 98, 2000, ME, NT Installation

Page 24

3. Windows 95, 98, 2000, ME, NT Installation

To allow easy configuration of the SSP-100, a Windows "INF" configuration file has

been written for the hardware.

3.1Installing a SSP-100 Under Windows 95, 98, ME, 2000.

1.Insert the SSP-100 into any available PC Card socket.

2.The first time a new PC Card type is installed the New Hardware Found window opens. After this first installation Windows will automatically detect and configure the card. If the New Hardware Found window does not open, then skip to the next section, “SSP-100 Resource Settings".

3.The New Hardware Found window provides several options to configure the SSP-100 card. Click the "Search for the best driver for your device" option button. Click "Next" to continue.

Figure 3. Windows 95,98, ME New Hardware Wizard (Search for the best

driver...)

SSP-100 User’s Manual

3-1

Image 24
Contents SSP-100 Page Page Warranty Information Declaration of Conformity Table of Contents Page Introduction This page intentionally left blank DOS / Windows 3.x Installation Client Driver Installation SSP-100 Client Driver for DOSCommand Line Options SsocketDevice = C\SSP-100\SSP100CL.SYS Device = C\SSP-100\SSP100CL.SYS b300,i5 Device = C\SSP-100\SSP100CL.SYS s0,b300,i5 s1,b340,i10 Common Problems Generic Client DriversSSP-100 Enabler for DOS Option is not used SSP100EN SSP100EN s0,b300,i3,wd8 SSP100EN s0,a3 Memory Range Exclusion This Page Left Intentionally Blank SSP-100 User’s Manual Windows 95, 98, 2000, ME, NT Installation Installing a SSP-100 Under Windows 95, 98, MEPage Windows 2000 New Hardware Wizard SSP-100 User’s Manual SSP-100 Resource Settings in Windows Viewing Resource Settings with Device ManagerWindows 95, 98,ME Device Manager SSP-100 User’s Manual Windows 2000 Device Manager Changing Resource Setting with Window 2000 Device Manager Windows 95,98,ME Resource Allocation SSP-100 User’s Manual Page Page Basic Configuration List Not Available Installing SSP-100 under Windows NT Page Page Page Installing Quatech Pcmcia Cards under Windows CE Windows CEPage Page OS/2 Installation Configuring With System Assigned Resources Configuring With User Assigned ResourcesDEVICE=C\SSP-100\SSP100.SYS 3,100,5 Advanced Configuration Topics OS/2 Plug and Play GUI with properly configured SSP-100 Monitoring The Status Of Pcmcia CardsThis Page Left Intentionally Blank External Connections SSP-100 Adapter CableThis page intentionally left blank Specifications SSP-100