AirborneDirect™ Ethernet Adapter Quick Start Guide | Quatech, Inc. |
Getting Started:
1
2
3
4
Open the AirborneDirect™ packaging and locate the Install CD.
Place the CD in the CD/DVD drive of the laptop or desktop you will be using to configure the AirborneDirect™ device. Follow the on screen directions for installation of the appropriate device software and documentation.
Connect the Ethernet cable on ABDG to an Ethernet port on the laptop or desktop system.
Apply power to the
5 |
6 |
The unit will boot and display one of the following LED patterns:
| Associated (Open Network) | Not Associated |
POWER: | Green | Green |
LINK : | Green | Red (Periodic Blinking) |
COMM: | Red | Red |
|
|
|
COMM: | Off |
|
LINK : | Off |
|
POST: | Orange |
|
POWER: | Blue |
|
Run the Airborne Management System application. This was installed during the CD installation and a menu item will be found in the Airborne folder located in the programs directory of your system.
When the application opens the following dialog will be displayed:
Select Group Name: manuf and enter Group Password: dpac
The AMC will load and discover the attached device.
7 
2 | February 2011 |