Quatech ABDG-ET-DP501/IN5010 quick start February, Kit Contents, What you will need

Quick Start Guide

Airborne Direct Ethernet Adapter

ABDG-ET-DP501/IN5010

Revision v2.1

February 2011

Document Number: 940-0193-210

Kit Contents:

Upon receiving the kit please check that you received the following:

∙ABDG-ET-DP501 or ABDG-ET-DP5010 Unit

∙5VDC Power Supply (2.1mm barrel jack) o included with ABDG-ET_DP501

o optional for ABDG-ET-DP5010, included only if ordered as an accessory

∙2dBi, 2.4Ghz 50 ohm, omni-directional antenna

∙Quick Start Guide

∙Airborne Direct software and documentation CD

If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170or support@quatech.com.

What you will need:

To evaluate the unit you will need the following components and facilities:

∙ABDG-ET-DP501 or ABDG-ET-IN5010 unit with included antenna attached.

∙Laptop or desktop system with an Ethernet port.

∙Power outlet for ABDG-ET-DP501/IN5010 power supply. Optionally 5-36 VDC power for the terminal block attachment (IN5010).

∙802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be known. Required information will include:

o SSID (Wireless network name).

o Security settings (WEP, WPA, WPA2, etc.).

o Security credentials (passphrase, key or certificates).

o Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.

∙A web browser on the laptop top or desktop (Internet Explorer, Firefox, Opera and Chrome v4.0 are supported).