AirborneDirect™ Ethernet Adapter Quick Start Guide | Quatech, Inc. |
Right Click the Unmanaged Device then:
1.Select Change Management State
2.Select Manage
3.Select Device
8 
The device’s status will move to managed and the device will be displayed under the device type/group it belongs to. Right click the device and then:
1.Select Connectivity Tools
2.Select Launch Web Browser for
9 
10
11
12
13
Opening web page shows adapter status.
Links to the available configuration options are identified in the left hand menu. The top menu bar provides access to different operations that can be performed by the AirborneDirect™ device. Please refer to the User’s Manual for a full description of how to use the web interface.
Using Express Setup:
If this is the first time you have configured the device the Express Setup page will be displayed. This page provides access to the critical configuration items needed to get the ABDG up and running quickly. See Express Setup Configuration Page section for details on how to configure the device.
Please refer to the User’s Manual for complete details on ABDG device configuration.
When the Reboot button is pressed the unit will restart and install new settings. This may take
When configured correctly the LED pattern should match the following:
|
| |
POWER: | Green |
|
LINK : | Green |
|
COMM: | Red |
|
| No TCP Connection | TCP Connection |
COMM: | Off | Green |
LINK : | Green | Green |
POST: | Green | Green |
POWER: | Blue | Blue |
14 | To use the adapter on the wireless network, address all traffic to the IP address of the wireless interface |
| |
| of the |
|
|
3 | February 2011 |