AirborneDirect™ Ethernet Adapter Quick Start Guide | Quatech, Inc. |
Express Setup Configuration Page
When the devices web interface is accessed for the first time an Express Setup page will be shown. This page is designed to allow a quick device
The Express Setup web page will display the necessary fields based upon the selections made during configuration. The Express Setup page looks like (Figure 1):
Figure 1 - Express Setup Page
To configure the device for operation each field must be configured correctly. The following steps should be taken to configure the device (Note: not all fields will be visible):
Table 1 - Express Page Setup
| Step |
|
| Description |
|
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Navigation Bar |
|
| You will see a group of fields under the banner of WLAN | |
| Select Configuration |
|
| Parameters. | |
|
|
|
|
| |
| Feature Link |
|
| This step is optional. If this is the first time the device has been | |
| Select Express Setup |
|
| configured this page will automatically be displayed. | |
|
|
|
|
| |
| Select Discovery OEM Device Name |
|
| This parameter allows you to name the device uniquely or | |
|
|
|
| group into a functional set. When device discovery is used this | |
|
|
|
| name identifies the found device. | |
|
|
|
| If you wanted to uniquely identify the device you could mark it | |
|
|
|
| with a label e.g. Dev1, and then enter Dev1 in this field. When | |
|
|
|
| the device is found it will identify itself as Dev1. | |
|
|
|
| Alternately you could indicate the type of equipment the device | |
|
|
|
| is attached to e.g. Haas | |
|
|
|
| the unit a name like Haas_TL_2. When discovered you can then | |
|
|
|
| identify the device you are accessing. | |
|
|
|
| Enter the text string is you wish to change the default value. | |
|
|
|
| This field is optional. | |
|
|
|
|
| |
| Select Radio Startup Mode |
|
| Select On from the drop down menu for the radio to operate. | |
|
|
|
|
|
|
4 | February 2011 |