Patton electronic 1068 user manual Qol

Page 19

Modem VLINK Power

Power

VLINK

Link

QOL

VLINK Link

VLINK QOL

Ethernet

Link

Ethernet Link

Ethernet Activity

Activity

 

Figure 12. VLINK modem rack card front panel

Table 6: Front panel LED description for rack card modem

 

 

 

LED

 

Description

 

 

 

Power

 

Solid GREEN to indicate the unit is powered on.

VLINK modem

 

(Active Green) Solid green (ON) to indicate that the

Link

 

end-to-end VDSL link between the VLINK modems is

 

 

established. The VLINK modem LED is OFF when

 

 

the link is down.

 

 

 

VLINK modem

 

(Active Yellow) Flashes YELLOW to indicate the pro-

QOL

 

cessor is correcting an error in the data thus prevent-

 

 

ing the transmission of corrupted data to the Ethernet

 

 

port. The more error corrections, the more often the

 

 

LED blinks. If the light remains lit continuously, it

 

 

means that the VDSL line is noisy—although the data

 

 

at the Ethernet port remains uncorrupted. Further

 

 

impairment of the line however, risks having the line

 

 

fail, as indicated by the green VLINK modem Link

 

 

LED extinguishing.

 

 

 

Ethernet Link

 

(Active Green) Solid Green indicates that

 

 

10/100Base-T Ethernet link has been established.

 

 

 

Ethernet Activity

 

(Active Yellow) Flashes yellow to indicate Ethernet

 

 

activity on the VLINK modem’s 10/100Base-T Ether-

 

 

net port.

 

 

 

 

19

Image 19
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Radio and TV Interference FCC Part Warranty InformationCE Declaration of Conformity Feet 3 meters of the device, shall be easily ServiceAccessible, and protected by a circuit breaker Tel +1 301 Email support@patton.comGeneral Information FeaturesTypical application DescriptionStandalone Unit Installation InstallationVlink Data & Voice 1068 1068RC Rack Card InstallationVlink modem RJ-45 twisted pair line interface Connecting the TWISTED-PAIR Line InterfaceVlink modem 10/100Base-T RJ-45 Connector Pinout Connecting the 10/100BASE-T Ethernet InterfaceConnecting Power Connecting the POTS/ISDN LineConfiguring the Hardware DIP Switches ConfigurationSwitch toggle Switches S1-2 and S1-4 Data Rate Configuring DIP Switch S1Switch S1-1 Ethernet Auto Sense S1-1 SettingS1-5 S1-6 S1-7 S1-8 Reserved for future use S1-2 S1-3 S1-4 Asymmetric Line Rates DS/USOperation Power UPFront Panel LED Status Monitors Description LEDLED is solid yellow and the Vlink Link LED is Off QOL LAN Connection LED Status IndicatorsPower Supply Appendix aDimensions Temperature RangeHumidity Patton Model # Description Appendix BPower Cords POTS/ISDN Interface Appendix C10/100BASE-T Interface Vdsl InterfaceSymm Line Rate Distance in feet km Appendix DAsymm Line Rate DS/US Distance in feet km Page Copyright Patton Electronics Company All Rights Reserved