Patton electronic 1068 user manual Service, Tel +1 301 Email support@patton.com

Page 5

The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the above directive is indicated by the CE

sign on the device.

This device is NOT intended nor approved for connec- tion to the PSTN. It is intended only for connection to customer premise equipment.

WARNING

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materi- als Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

Tel: +1 (301) 975-1007

Email: support@patton.com

URL: http://www.patton.com

Note Packages received without an RMA number will not be

accepted.

 

This device contains no user serviceable parts. The

 

equipment shall be returned to Patton Electronics for

 

repairs, or repaired by qualified service personnel.

 

The external power adapter shall be a listed Limited

WARNING

Power Source. Ensure that the power cable used

 

meets all applicable standards for the country in

 

which it is to be installed, and that it is connected to

 

a wall outlet which has earth ground. The mains out-

 

let that is utilized to power the devise shall be within

 

10 feet (3 meters) of the device, shall be easily

 

accessible, and protected by a circuit breaker.

 

Do not work on the system or connect or disconnect

 

cables during periods of lightning activity.

 

 

5

Image 5
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM CE Declaration of Conformity Warranty InformationRadio and TV Interference FCC Part Accessible, and protected by a circuit breaker ServiceTel +1 301 Email support@patton.com Feet 3 meters of the device, shall be easilyGeneral Information FeaturesTypical application DescriptionVlink Data & Voice 1068 InstallationStandalone Unit Installation 1068RC Rack Card InstallationVlink modem RJ-45 twisted pair line interface Connecting the TWISTED-PAIR Line InterfaceVlink modem 10/100Base-T RJ-45 Connector Pinout Connecting the 10/100BASE-T Ethernet InterfaceConnecting Power Connecting the POTS/ISDN LineConfiguring the Hardware DIP Switches ConfigurationSwitch toggle Switch S1-1 Ethernet Auto Sense Configuring DIP Switch S1S1-1 Setting Switches S1-2 and S1-4 Data RateS1-5 S1-6 S1-7 S1-8 Reserved for future use S1-2 S1-3 S1-4 Asymmetric Line Rates DS/USFront Panel LED Status Monitors Power UPOperation LED is solid yellow and the Vlink Link LED is Off LEDDescription QOL Power Supply LED Status IndicatorsAppendix a LAN ConnectionHumidity Temperature RangeDimensions Patton Model # Description Appendix BPower Cords 10/100BASE-T Interface Appendix CVdsl Interface POTS/ISDN InterfaceAsymm Line Rate DS/US Distance in feet km Appendix DSymm Line Rate Distance in feet km Page Copyright Patton Electronics Company All Rights Reserved