Patton electronic 4830 Series quick start Introduction, SmartNode product SmartNode 4838 shown

SmartNode 4830 Quick Start Guide

Introduction

This Quick Start Guide leads you through the basic steps to set up a new SmartNode (see figure 1) and to download a configuration. Please note that this guide does not replace the detailed Software Configuration Guide and the Getting Started Guide on the CD-ROM and available online at www.patton.com/voip.

Figure 1. SmartNode product (SmartNode 4838 shown)

SmartNodes can be used for a wide variety of IP and voice over IP applications. To support and ease the config- uration of the SmartNodes configuration templates for the most important applications are available online at http://www.patton.com/voip/appnotes.shtml.

Setting up a new SmartNode consists of the following steps:

1.Connect a PC to the SmartNode, log in and configure your LAN IP address (see page 4 for details)

2.Connect the SmartNode to the LAN (see page 6)

3.Download a configuration example, adapt it to your network, and load it onto the SmartNode (see page 6)

Introduction 3

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030