Patton electronic 3086 manual E1/CRC

Model 3086 G.SHDSL Integrated Access Device User Guide4 • Basic Application Configurations

S7	S6	S5	S4	S3	S2	S1	Data Rate (kbps)
On	On	Off	On	On	Off	Off	1216
On	On	Off	On	Off	On	On	1280
On	On	Off	On	Off	On	Off	1344
On	On	Off	On	Off	Off	On	1408
On	On	Off	On	Off	Off	Off	1472
On	On	Off	Off	On	On	On	1536
On	On	Off	Off	On	On	Off	1600
On	On	Off	Off	On	Off	On	1664
On	On	Off	Off	On	Off	Off	1728
On	On	Off	Off	Off	On	On	1792
On	On	Off	Off	Off	On	Off	1856
On	On	Off	Off	Off	Off	On	1920
On	On	Off	Off	Off	Off	Off	1984
On	Off	On	On	On	On	On	2048

Switch S2-8.S2-8 activates configuration of Model 3086 via DIP switches. Any time the user desires to mod- ify the 3086 configuration available through DIP switches, make the changes to the corresponding switches and then set S2-8, from On to Off position, wait 3-4 seconds and set back to the On position. Changes made to configuration via DIP switches will not take effect if S2-8 isn’t toggled.

S2-8	Condition
ON->Off->ON	Implements switch configuration (toggled ON/OFF)

Switch Bank S3

The table below shows the default configuration for switch S3. A description of S3 options follows this table.

Table 8. S3 Summary Table

Switch Position	Function	Factory Default	Selected Option
S3-1	CO/CP Selection	On	CO
S3-2	Reserved	On	Reserved
S3-3	Clock	On	External
S3-4	Reserved	On	Reserved
S3-5	Reserved	On	Reserved
S3-6	Annex	Off = Annex A	Annex B
		On = Annex B
S3-7	T1/E1	On	T1
S3-8	E1/CRC	On	No CRC

Switch S3-1: CO/CP selection. CO and CP stand for Central Office and Customer Premise respectively. When deploying the model 3086s, units installed at the Customer location should be set to CP and units

E1 Interface 51