TP-Link TL-SG1048/TL-SG1024, TL-SG1204D/TL-SG1016, TL-SG1016D/TL-SG1008 manual Rear Panel, LEDs

Gigabit Unmanaged Switch

The front panel of TL-SG1008 is shown as the following figure.

LEDs

10/100/1000Mbps RJ45 Port

		FFFFFFFFFFF Front Panel of TL-SG1008
LEDs
LED	Status		Indication
Power	On		The Switch is powered on
	Off		The Switch is powered off or power supply is abnormal
	On		There is a device linked to the corresponding port but
			not active
Link/Act
	Flashing		The corresponding port is transmitting or receiving data
	Off		There is no device linked to the corresponding port
	On		A 1000Mbps device is connected to the corresponding
			port
1000Mbps
	Off		A 10/100Mbps device or no device is connected to the
			corresponding port

Note: TL-SG1048 has no 1000Mbps LEDs while its Link/Act LEDs can indicate port speed by flashing different colors (Green:1000Mbps, Yellow:10/100Mbps\.

10/100/1000Mbps Port

Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each has a corresponding Link/Act LED and a 1000Mbps LED. TL-SG1048 has no 1000Mbps LEDs while its Link/Act LEDs can indicate port speed by fashing different colors (Green:1000Mbps,Yellow:10/100Mbps\.

Rear Panel

The rear panel of TL-SG1048 is shown as the following figure.

Power Socket

Grounding Terminal

FFFFFFFFFFFRear Panel of TL-SG1048

The rear panel of TL-SG1024/TL-SG1016 is shown as the following figure.

03 Introduction