TP-Link TL-WR941ND manual Quick Setup Static IP

TL-WR941N/TL-WR941ND

Wireless N Router

Figure 3-8 Quick Setup - Static IP

¾IP Address - This is the WAN IP address as seen by external users on the Internet (including your ISP). Enter the IP address into the field.

¾Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually 255.255.255.0

¾Default Gateway - Enter the gateway IP address into the box if required.

¾Primary DNS - Enter the DNS Server IP address into the box if required.

¾Secondary DNS - If your ISP provides another DNS server, enter it into this field.

4. Click Next to continue, the Wireless settings page will appear, shown in Figure 3-9.

Figure 3-9 Quick Setup – Wireless

¾Wireless Radio - Enable or disable the wireless radio choosing from the pull-down list.

¾SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. Considering your wireless network security, the default SSID is set to be TP-LINK_xxxxxx (xxxxxx indicates the last unique six numbers of each Router’s MAC address). This value is case-sensitive. For example, TP-LINKis NOT the same as tp-link.

- 12 -