TP-Link TL-WR941ND manual Wireless Advanced, To access for Filtering Rules

TL-WR941N/TL-WR941ND

Wireless N Router

to access for Filtering Rules.

3.Delete all or disable all entries if there are any entries already.

4.Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE/00-0A-EB-00-07-5F in the MAC Address field, then enter wireless station A/B in the Description field, while select Enabled in the Status pull-down list. Finally, click the Save and the Back button.

The filtering rules that configured should be similar to the following list:

4.6.4 Wireless Advanced

Choose menu “Wireless→Wireless Advanced”, you can configure the advanced settings of your wireless network.

Figure 4-16 Wireless Advanced

¾Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here. The beacons are the packets sent by the router to synchronize a wireless network. Beacon Interval value determines the time interval of the beacons. The default value is 100.

¾RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet is larger than the specified RTS Threshold size, the router will send RTS frames to a particular receiving station and negotiate the sending of a data frame. The default value is 2346.

- 33 -