TP-Link TL-WR941ND manual Dhcp Clients List

Page 41

TL-WR941N/TL-WR941ND

Wireless N Router

computer.

¾Start IP Address - This field specifies the first of the addresses in the IP address pool. 192.168.1.100 is the default start address.

¾End IP Address - This field specifies the last of the addresses in the IP address pool. 192.168.1.199 is the default end address.

¾Address Lease Time - The Address Lease Time is the amount of time in which a network user will be allowed connection to the router with their current dynamic IP Address. Enter the amount of time, in minutes. The user will be "leased" this dynamic IP Address. The range of the time is 1 ~ 2880 minutes. The default value is 120 minutes.

¾Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the router, default value is 192.168.1.1

¾Default Domain - (Optional.) Input the domain name of your network.

¾Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your ISP.

¾Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP provides two DNS servers.

)Note:

To use the DHCP server function of the router, you must configure all computers on the LAN as "Obtain an IP Address automatically" mode.

4.7.2 DHCP Clients List

Choose menu “DHCP→DHCP Clients List”, you can view the information about the clients attached to the router in the next screen (shown in Figure 4-20).

Figure 4-20 DHCP Clients List

¾ID - The index of the DHCP Client

¾Client Name - The name of the DHCP client

¾MAC Address - The MAC address of the DHCP client

¾Assigned IP - The IP address that the router has allocated to the DHCP client.

¾Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, the user will be automatically assigned a new dynamic IP address.

- 36 -

Image 41

Contents TL-WR941N TL-WR941ND Copyright & Trademarks FCC Statement Country Restriction Reason/remark FCC RF Radiation Exposure StatementContents Dhcp Package Contents Overview of the Router IntroductionConventions Main FeaturesName Status Indication Panel LayoutFront Panel Rear Panel ¾ Reset buttonInstallation Environment Requirements Connecting the RouterConnecting the Router System RequirementsHardware Installation of the TL-WR941ND Wireless N Router TCP/IP configuration Quick Installation GuidePlease check the connection following these steps Success result of Ping command3Login the router Quick Installation GuideChoose WAN Connection Type Quick Setup Static IP 10 Quick Setup Finish Status Configuring the RouterLogin Router Status Quick SetupQSS Quick Secure Setup functionBy PBC Method OneAdd a New Device Method TwoII. By PIN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND 2 WAN Network1 LAN TL-WR941N/TL-WR941ND TL-WR941N/TL-WR941ND WAN PPPoE PPPoE Advanced Settings MAC Clone Wireless12 Wireless Settings Wireless SettingsWireless Security TL-WR941N/TL-WR941ND Encryption You can select either Automatic, or Tkip or AES 14 Wireless MAC address Filtering Wireless MAC Filtering15 Add or Modify Wireless MAC Address Filtering entry To access for Filtering Rules Wireless Advanced17 The router attached wireless stations Wireless StatisticsDhcp Dhcp Settings20 Dhcp Clients List Dhcp Clients ListTo modify or delete an existing entry Address ReservationTo Reserve IP addresses Delete ForwardingVirtual Servers 25 Add or Modify a Virtual Server Entry To setup a virtual server entryPort Triggering 27 Add or Modify a Triggering Entry To assign a computer or server to be a DMZ server 3 DMZUPnP Firewall SecurityIP Filtering ¾ Enable Firewall the general firewall switch is on or offTo add/modify an IP Address filtering entry TL-WR941N/TL-WR941ND Domain Filtering Other configurations for the entries35 Add or Modify a Domain Filtering entry To Add a Domain filtering entryTo add or modify a Domain Filtering entry MAC FilteringTo add additional entries, repeat steps Static Routing38 Static Routing To add static routing entriesDynamic DNS 40 Dyndns.org Ddns SettingsSystem Tools Time SettingTo configure the system manually Firmware To configure the system automaticallyBackup & Restore Factory DefaultsPassword RebootSystem log 47 PasswordStatistics Remote ManagementTCP Statistics TableFigure A-2 PPPoE Connection Mode Appendix a FAQWant to use Netmeeting, what do I need to do? Figure A-3 MAC CloneWant to build a WEB Server on the LAN, what should I do? Figure A-5 Add or Modify a Virtual server EntryFigure A-7 Remote Management Wireless stations cannot connect to the routerTL-WR941N/TL-WR941ND Install TCP/IP component Appendix B Configuring the PCsShown in the Figure below Figure B-3 ¾ Setting IP address manuallyFigure B-4 Wireless Appendix C SpecificationsGeneral Environmental and PhysicalAppendix D Glossary TL-WR941N/TL-WR941ND

Related manuals

Manual 113 pages 40.69 Kb