Polycom 1725-36033-001 manual SpectraLink 8000 SVP Server, Administrative computer, Tftp server

Page 15

SpectraLink 8000 SVP Server Overview

network traffic is restricted to those segments that are directly involved in the communication. Installation of a network router is recommended in larger networks, where there may be significant network traffic not related to the wireless LAN. A router will isolate the wireless LAN from the associated wired LAN so that they are not impacted by each others’ traffic. The SVP Servers, the APs, and their associated Ethernet switch must all be on the same “side” of the router.

SpectraLink 8000 SVP Server

The SVP Server manages call network traffic as detailed in this document.

Administrative computer

An administrative computer is required for setup and maintenance of the SVP Server. This computer may be temporarily connected directly to the component or to the network; a dedicated computer is not required. Some installations use a laptop to configure and maintain system components.

TFTP server

Required in an IP system to distribute software to the wireless telephones and SVP Server. May be on a different subnet than the IP gateway, IP telephony server, and APs.

PN: 1725-36033-001_C.doc

15

Image 15
Contents Administration Guide Trademark Information About This Document Polycom Model NumbersRelated Documents Icons and Conventions Customer SupportContents Index47H Software MaintenanceSafety Notices Swapping/Adding/Deleting SVP ServersSpectraLink 8000 SVP Server Overview SpectraLink Voice Priority SVP Quality of ServiceSpectraLink 8000 SVP Server Models Timing FunctionMultiple SVP Servers Registration Server identification SVP Server availabilityMultiple SVP Server Capacities SpectraLink SVP010 and SVP020 Server capacitySpectraLink SVP100 Server capacity SpectraLink 8000 SVP Server Overview SpectraLink 8000 SVP Server Administration Guide for SIP PBX System DiagramRouter Access pointsEthernet switch System ComponentsAdministrative computer SpectraLink 8000 SVP ServerTftp server LEDs Front Panel of the SVP ServerRequired Materials Installing the SpectraLink 8000 SVP ServerInstall the SVP Server Locate the SVP ServerMount the SVP Server on a rack Mount the SVP Server to a wall Grounding instructions SafetyConnect SVP Server to LAN Connect powerConfiguring the SpectraLink 8000 SVP Server Connecting to the SVP ServerConnect via the serial port NetLink SVP-II System Menu Connecting via telnetNetwork Configuration Hostname IP AddressDNS Server and DNS Domain Default GatewaySubnet Mask SVP-II Tftp Download MasterSVP Server Configuration Disable Telnet serviceSyslog Server Rate Phones per Access PointEthernet link Enable H.323 GatekeeperMaintenance Lock First Alias IP Address/Last Alias IP AddressReset all SVP Servers Inactivity Timeout minQoS Configuration Reset SystemDscp Tag QoS ConfigurationDefault value as shown in the table below will be used Change Password Adding an SVP Server Swapping/Adding/Deleting SVP ServersSVP Server Failure Software Updates Software MaintenancePage Troubleshooting via System Status Menu Alarm Text Action Error StatusNetwork Status Bytes bytes transmitted packets packets transmitted Software Version Name Major Version Filename Number Important Safety Information Safety NoticesPage Index