Polycom 1725-36033-001 manual SVP Server Configuration, Syslog Server, Disable Telnet service

Page 26

SpectraLink 8000 SVP Server: Administration Guide for SIP

Syslog Server

Logging can be set to Syslog or NONE. If Syslog is set, a message is sent to the syslog server when an alarm is triggered.

Disable Telnet service

Prevents Telnet access into the SVP Server. Reset the SVP Server for the change to take effect. Upon reset the Telnet protocol server is not started.

The SVP Server must be reset in order to set the configuration options. If the SVP Server is in Maintenance Lock, you must manually reset it by selecting the Reset option in the SVP-II Configuration screen and then pressing Y upon exit.

SVP Server Configuration

The SVP-II Configuration screen is where you set the mode of the SVP Server. It is also where you can lock the SVP Server for maintenance and reset the SVP Server after maintenance. The type of gateway you are using determines the mode of the SVP Server.

From the main menu, scroll to SVP-II Configuration and select by pressing Enter.

26	PN: 1725-36033-001_C.doc

Image 26

Contents Administration Guide Trademark Information Related Documents About This DocumentPolycom Model Numbers Customer Support Icons and ConventionsContents Swapping/Adding/Deleting SVP Servers Software MaintenanceSafety Notices Index47HSpectraLink Voice Priority SVP Quality of Service SpectraLink 8000 SVP Server OverviewMultiple SVP Servers SpectraLink 8000 SVP Server ModelsTiming Function SVP Server availability Registration Server identificationSpectraLink SVP100 Server capacity Multiple SVP Server CapacitiesSpectraLink SVP010 and SVP020 Server capacity SpectraLink 8000 SVP Server Overview SpectraLink 8000 SVP Server Administration Guide for SIP System Diagram PBXSystem Components Access pointsEthernet switch RouterTftp server Administrative computerSpectraLink 8000 SVP Server Front Panel of the SVP Server LEDsInstalling the SpectraLink 8000 SVP Server Required MaterialsMount the SVP Server on a rack Install the SVP ServerLocate the SVP Server Grounding instructions Safety Mount the SVP Server to a wallConnect power Connect SVP Server to LANConnect via the serial port Configuring the SpectraLink 8000 SVP ServerConnecting to the SVP Server Connecting via telnet NetLink SVP-II System Menu Network Configuration IP Address HostnameSVP-II Tftp Download Master Default GatewaySubnet Mask DNS Server and DNS DomainSyslog Server SVP Server ConfigurationDisable Telnet service Phones per Access Point RateFirst Alias IP Address/Last Alias IP Address Enable H.323 GatekeeperMaintenance Lock Ethernet linkReset System Inactivity Timeout minQoS Configuration Reset all SVP ServersQoS Configuration Dscp TagDefault value as shown in the table below will be used Change Password Swapping/Adding/Deleting SVP Servers Adding an SVP ServerSVP Server Failure Software Maintenance Software UpdatesPage Troubleshooting via System Status Menu Error Status Alarm Text ActionNetwork Status Bytes bytes transmitted packets packets transmitted Software Version Name Major Version Filename Number Safety Notices Important Safety InformationPage Index