Polycom 1725-36033-001 manual Mount the SVP Server to a wall, Grounding instructions Safety

Page 19

Installing the SpectraLink 8000 SVP Server

Mount the SVP Server to a wall

The SVP Server can be mounted either horizontally or vertically. To mount the SVP Server to a wall:

1.Using a 1/8-inch drill bit, drill four pilot holes, on 1.84-inch by 12.1-inch centers (approximately equivalent to 1-13/16” by 12-1/8”).

2.Insert the #8 3/4-inch screws in the pilot holes and tighten, leaving a 1/8-inch to 1/4-inch-gap from the wall.

Grounding instructions

Safety

Warning

The metal chassis of this unit may contain leakage currents (i.e., "touch" current) which is cumulative when multiple units are connected together to form a system. To prevent the summation of leakage currents from being present on exposed metal surfaces, the following installation procedure must be followed.

All system units must be grounded to a protective earth by means of the grounding stud located on the rear panel. Refer to the illustration below for recommended continuity connection.

No more than 15 units may be grounded through one connection to the protective earth ground. Systems involving more than 15 units must be broken up into groups of 15 or fewer units with each group provided with an independent protective earthing conductor.

PN: 1725-36033-001_C.doc

19

Image 19
Contents Administration Guide Trademark Information Polycom Model Numbers About This DocumentRelated Documents Icons and Conventions Customer SupportContents Index47H Software MaintenanceSafety Notices Swapping/Adding/Deleting SVP ServersSpectraLink 8000 SVP Server Overview SpectraLink Voice Priority SVP Quality of ServiceTiming Function SpectraLink 8000 SVP Server ModelsMultiple SVP Servers Registration Server identification SVP Server availabilitySpectraLink SVP010 and SVP020 Server capacity Multiple SVP Server CapacitiesSpectraLink SVP100 Server capacity SpectraLink 8000 SVP Server Overview SpectraLink 8000 SVP Server Administration Guide for SIP PBX System DiagramRouter Access pointsEthernet switch System ComponentsSpectraLink 8000 SVP Server Administrative computerTftp server LEDs Front Panel of the SVP ServerRequired Materials Installing the SpectraLink 8000 SVP ServerLocate the SVP Server Install the SVP ServerMount the SVP Server on a rack Mount the SVP Server to a wall Grounding instructions SafetyConnect SVP Server to LAN Connect powerConnecting to the SVP Server Configuring the SpectraLink 8000 SVP ServerConnect via the serial port NetLink SVP-II System Menu Connecting via telnetNetwork Configuration Hostname IP AddressDNS Server and DNS Domain Default GatewaySubnet Mask SVP-II Tftp Download MasterDisable Telnet service SVP Server ConfigurationSyslog Server Rate Phones per Access PointEthernet link Enable H.323 GatekeeperMaintenance Lock First Alias IP Address/Last Alias IP AddressReset all SVP Servers Inactivity Timeout minQoS Configuration Reset SystemDscp Tag QoS ConfigurationDefault value as shown in the table below will be used Change Password Adding an SVP Server Swapping/Adding/Deleting SVP ServersSVP Server Failure Software Updates Software MaintenancePage Troubleshooting via System Status Menu Alarm Text Action Error StatusNetwork Status Bytes bytes transmitted packets packets transmitted Software Version Name Major Version Filename Number Important Safety Information Safety NoticesPage Index

1725-36033-001 specifications

The Polycom 1725-36033-001 is a high-performance accessory designed to enhance the functionality of Polycom communication devices, notably their range of conference phones. This particular model is part of Polycom's extensive suite of audio solutions aimed at improving the quality of audio during conference calls and meetings, catering to businesses of all sizes.

One of the main features of the Polycom 1725-36033-001 is its exceptional audio quality. Polycom has long been a leader in audio technology, employing patented Acoustic Clarity Technology that ensures crystal-clear voice transmission. This feature significantly reduces background noise and echo, allowing participants to communicate more effectively without the strain of repeatedly asking for clarification.

Another key characteristic is its scalability and flexibility. The Polycom 1725-36033-001 is designed to work seamlessly with various Polycom conferencing systems, enabling users to expand their audio capabilities as their needs grow. This is particularly advantageous for companies that may host larger meetings or require multiple units in different conference rooms.

Integration is another important aspect of this model. Polycom devices are known for their ability to connect with a wide range of communication platforms, and the 1725-36033-001 is no exception. It easily interfaces with popular video conferencing solutions and unified communication platforms, making it a versatile choice for organizations transitioning towards a more integrated communication strategy.

Durability is also a feature of the Polycom 1725-36033-001. Constructed with high-quality materials, it is built to withstand heavy use in busy office environments. Its design is both user-friendly and intuitive, ensuring that all staff members can navigate its features with ease.

Furthermore, the model embodies energy efficiency, complying with various energy standards which make it an eco-friendly option for companies focused on sustainability.

Overall, the Polycom 1725-36033-001 is a reliable and efficient solution for organizations looking to enhance their conferencing capabilities. Its sound quality, integration options, scalability, and durability make it a worthwhile investment, ensuring improved communication and collaboration in any professional setting. As technology continues to evolve, the Polycom 1725-36033-001 remains a steadfast choice for effective audio solutions in the workplace.