Polycom A2400, A200, A6000, A800 manual Recommended AP configuration settings

CLI Commands

Required Settings

Default

Description

Settings

Max-clients <x>

40

0

Max clients that can associate

with the AP.

Beacon-interval <x>

Set to default

100

The interval at which beacons

milliseconds

are sent out .

dtim-period <x>

3

1

Delivery Traffic Indication

Message interval in terms of

beacon interval.

hide-essid <enable /

Enable

Disable

To disable the ESSID from

disable>

being broadcasted.

Max-retries

2

4

Maximum number of times the

AP tries to send a packet to the

client before discarding the

packet.

b/g-mode

Mixed

Mixed

The radio mode of the b/g

radio.

Tx-power <0-4>

0

As per the environment. This

need not be set if ARM is

enabled.

Channel <x>

1

This is the channel assigned to

the radio. Need not be set if

ARM is enabled.

802.11b/g rates

These rates should be

5,11

determined from RF site

survey. Verify you have

sufficient coverage to

support data rates.

802.11b/g Tx rates

These rates should be

1,2,5,11

The supported Tx rates for

determined from RF site

802.11b/g.

survey. Verify you have

sufficient coverage to

support data rates.

802.11b/g rates (if all

These rates should be

5,11

wireless client are

determined from RF site

802.11g)

survey. Verify you have

sufficient coverage to

support data rates.

PN: 1725-36080-001_J.doc

15