Polycom A200, A6000, A800, A2400 manual Essid

Page 16

Configuration Guide

CLI Commands	Required Settings	Default	Description
		Settings
802.11b/g Tx rates (if	These rates should be	1,2,5,11
all wireless client are	determined from RF site
802.11g)	survey. Verify you have
	sufficient coverage to
	support data rates.
802.11a rates	These rates should be	6,9,12,24
	determined from RF site
	survey. Verify you have
	sufficient coverage to
	support data rates.
802.11a Tx rates	These rates should be	6,9,12,18,24,	The supported Tx rates for
	determined from RF site	36,48,54	802.11a.
	survey. Verify you have
	sufficient coverage to
	support data rates.
ESSID	<voice ssid as configured>	Aruba	This is the ESSID that the voice
			devices would associate with.
Short preamble	Tested: Enable	Enable	Set the short preamble to
	Recommended: Disable		disable, to enable long-
			preamble-only support.

16	PN: 1725-36080-001_J.doc

Image 16

Contents

Aruba Trademark Information Patent InformationCopyright Notice Contact InformationIntroduction Certified Product SummaryNetwork Topology Known LimitationsInterface setting Default routeConnecting the APs Deployment DescriptionCommand, comment, and screen text key Connecting to the Mobility ControllerVia console Via the CLI Via the Web interfaceInitial Setup On power-up, the user is presented with the startup wizardWelcome to Aruba Wireless Networks Aruba User Assigning an IP to the Mobility Controller Connecting APs Provisioning APs Ssid Configuration CLI command configurationWeb-based configuration Click the Apply buttonAccess Point Configuration Channel and Tx powerRadio setting 802.11b or 802.11g Preamble settingsRecommended AP configuration settings CLI Commands Required Settings Default DescriptionEssid Clear the ARM Scanning check box Configuration Guide To assign the power and channel setting manually Dynamic RF Management ARM Aware Scanning Security Policies and QoS Create an alias for the SVP ServerCreate policies for the wireless telephone user Assign policies to the role Configuration Guide Authentication Quality of Service QoS Subnet Roaming Commands for the master switch the Aruba Commands for the local switch the ArubaCLI Commands to Verify Setup for Subnet Routing From the ArubaChecking the Configuration