Polycom A2400, A200, A6000, A800 To assign the power and channel setting manually

Page 19

Aruba Mobility Controllers: A200, A800, A2400, A6000

10.Click the 802.11 a tab.

11.For Max Retries, enter 2 for voice.

12.For the DTIM period, enter 3.

13.For Basic Rates and Supported Rates, consult the facilities RF site survey to determine if coverage is sufficient to support all data rates.

14.To assign the power and channel setting manually:

a.For ARM Assignment, select Disabled.

b.Clear the ARM Scanning check box.

c.Set the Default Channel and Initial Transmit Power from their drop- down lists.

d.For Mode, click the Access-pointoption.

15.Click the Apply button.

PN: 1725-36080-001_J.doc

19

Image 19

Contents

Aruba Contact Information Trademark InformationPatent Information Copyright NoticeCertified Product Summary IntroductionKnown Limitations Network TopologyDeployment Description Interface settingDefault route Connecting the APsCommand, comment, and screen text key Connecting to the Mobility ControllerVia console Via the Web interface Via the CLIOn power-up, the user is presented with the startup wizard Initial SetupWelcome to Aruba Wireless Networks Aruba User Assigning an IP to the Mobility Controller Provisioning APs Connecting APsCLI command configuration Ssid ConfigurationClick the Apply button Web-based configurationPreamble settings Access Point ConfigurationChannel and Tx power Radio setting 802.11b or 802.11g CLI Commands Required Settings Default Description Recommended AP configuration settingsEssid Clear the ARM Scanning check box Configuration Guide To assign the power and channel setting manually Dynamic RF Management ARM Aware Scanning Create an alias for the SVP Server Security Policies and QoSCreate policies for the wireless telephone user Assign policies to the role Configuration Guide Authentication Quality of Service QoS Subnet Roaming Commands for the local switch the Aruba Commands for the master switch the ArubaFrom the Aruba CLI Commands to Verify Setup for Subnet RoutingChecking the Configuration