Polycom A800, A200, A6000, A2400 manual Create policies for the wireless telephone user

Aruba Copyright Notice Trademark InformationPatent Information Contact InformationIntroduction Certified Product SummaryNetwork Topology Known LimitationsConnecting the APs Interface settingDefault route Deployment DescriptionCommand, comment, and screen text key Connecting to the Mobility ControllerVia console Via the CLI Via the Web interfaceInitial Setup On power-up, the user is presented with the startup wizardWelcome to Aruba Wireless Networks Aruba User Assigning an IP to the Mobility Controller Connecting APs Provisioning APsSsid Configuration CLI command configurationWeb-based configuration Click the Apply buttonRadio setting 802.11b or 802.11g Access Point ConfigurationChannel and Tx power Preamble settingsRecommended AP configuration settings CLI Commands Required Settings Default DescriptionEssid Clear the ARM Scanning check box Configuration Guide To assign the power and channel setting manually Dynamic RF Management ARM Aware Scanning Security Policies and QoS Create an alias for the SVP ServerCreate policies for the wireless telephone user Assign policies to the role Configuration Guide Authentication Quality of Service QoS Subnet Roaming Commands for the master switch the Aruba Commands for the local switch the ArubaCLI Commands to Verify Setup for Subnet Routing From the ArubaChecking the Configuration