Polycom A800 Trademark Information, Patent Information, Copyright Notice, Contact Information

Page 2

Configuration Guide

Trademark Information

Polycom® and the logo designs SpectraLink®

LinkPlus Link NetLink

SVP

Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property of their respective owners.

Patent Information

The accompanying product is protected by one or more US and foreign patents and/or pending patent applications held by Polycom, Inc.

Copyright Notice

Copyright © 2006 to 2008 Polycom, Inc.

All rights reserved under the International and pan-American copyright Conventions.

No part of this manual, or the software described herein, may be reproduced or transmitted in any form or by any means, or translated into another language or format, in whole or in part, without the express written permission of Polycom, Inc.

Do not remove (or allow any third party to remove) any product identification, copyright or other notices.

Every effort has been made to ensure that the information in this document is accurate. Polycom, Inc. is not responsible for printing or clerical errors. Information in this document is subject to change without notice and does not represent a commitment on the part of Polycom, Inc.

Notice

Polycom, Inc. has prepared this document for use by Polycom personnel and customers. The drawings and specifications contained herein are the property of Polycom and shall be neither reproduced in whole or in part without the prior written approval of Polycom, nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.

Polycom reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Polycom to determine whether any such changes have been made.

No representation or other affirmation of fact contained in this document including but not limited to statements regarding capacity, response-time performance, suitability for use, or performance of products described herein shall be deemed to be a warranty by Polycom for any purpose, or give rise to any liability of Polycom whatsoever.

Contact Information

Please contact your Polycom Authorized Reseller for assistance.

Polycom, Inc.

4750 Willow Road, Pleasanton, CA 94588 http://www.polycom.com

2

PN: 1725-36080-001_J.doc

Image 2 Contents
Aruba Copyright Notice Trademark InformationPatent Information Contact InformationIntroduction Certified Product SummaryNetwork Topology Known LimitationsConnecting the APs Interface settingDefault route Deployment DescriptionVia console Connecting to the Mobility ControllerCommand, comment, and screen text key Via the CLI Via the Web interfaceInitial Setup On power-up, the user is presented with the startup wizardWelcome to Aruba Wireless Networks Aruba User Assigning an IP to the Mobility Controller Connecting APs Provisioning APsSsid Configuration CLI command configurationWeb-based configuration Click the Apply buttonRadio setting 802.11b or 802.11g Access Point ConfigurationChannel and Tx power Preamble settingsRecommended AP configuration settings CLI Commands Required Settings Default DescriptionEssid Clear the ARM Scanning check box Configuration Guide To assign the power and channel setting manually Dynamic RF Management ARM Aware Scanning Security Policies and QoS Create an alias for the SVP ServerCreate policies for the wireless telephone user Assign policies to the role Configuration Guide Authentication Quality of Service QoS Subnet Roaming Commands for the master switch the Aruba Commands for the local switch the ArubaCLI Commands to Verify Setup for Subnet Routing From the ArubaChecking the Configuration