TP-Link manual Using the Management Utility, Status, TL-PA411 AV500 Mini Powerline Adapter

Page 18
Chapter 4 Using the Management Utility

TL-PA411AV500 Mini Powerline Adapter

Chapter 4 Using the Management Utility

After you’d successfully installed the Powerline Adapter hardware and Management Utility software, you can set up or configure the devices according to your need.

This Powerline Utility enables the users to identify powerline devices on the powerline network, measures data rate performance and ensures privacy by setting user defined secure powerline networks.

Double click on the icon 4.1 Statusfrom your windows desktop, the following screen will display. This Management Utility consists of a four property tabs, “Status”, “Network”, “Advanced” and “System”.

4.1 Status

The Status tab shows information of the powerline adapter connected to the current computer where the Management Utility is running. On this page, you can also set its network name.

13

Image 18
Contents TL-PA411 AV500 Mini Powerline Adapter Rev 1910010651COPYRIGHT & TRADEMARKS FCC STATEMENT CE Mark WarningRd, Nanshan, Shenzhen, China DECLARATION OF CONFORMITYProduct Description AV500 Mini Powerline Adapter EN EN EN 61000-3-22006+A12009+A22009 EN ENChapter 4 Using the Management Utility CONTENTSPackage Contents Appendix A TroubleshootingPackage Contents TL-PA411 AV500 Mini Powerline Adapter1.1 Conventions Chapter 1 Introduction1.3 Important Safety Instructions 1.2 System Requirement¾ If liquid has been spilled on the product 2.1 Introduction Chapter 2 Connecting Mechanism2.2 LED Indicator StatusInterface 2.3 Physical InterfaceTL-PA411 Description2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA411 AV500 Mini Powerline Adapter Chapter 3 Installing Management Utility TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.1 Rename the Remote Device/Enter Password Password is unnecessary to enter for renaming4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware To upgrade the devices firmware, follow these instructions 4.4.2 Reset Device4.4.3 Set All Devices’ Network Name Create a Powerline network using the Pair button: Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button 5.1 Pair Secure with 128 bits-AESJoin an existing Powerline AV Network Leave an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 3. The Powerline LED does not light up Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 2. The Ethernet LED does not light up. Ans. Check the following