TP-Link TL-PA411 Introduction, Conventions, System Requirement, Important Safety Instructions

Contents Rev 1910010651 TL-PA411 AV500 Mini Powerline AdapterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTEN EN EN 61000-3-22006+A12009+A22009 EN EN DECLARATION OF CONFORMITYProduct Description AV500 Mini Powerline Adapter Rd, Nanshan, Shenzhen, ChinaAppendix A Troubleshooting CONTENTSPackage Contents Chapter 4 Using the Management UtilityTL-PA411 AV500 Mini Powerline Adapter Package Contents1.2 System Requirement Chapter 1 Introduction1.3 Important Safety Instructions 1.1 Conventions¾ If liquid has been spilled on the product Status Chapter 2 Connecting Mechanism2.2 LED Indicator 2.1 IntroductionDescription 2.3 Physical InterfaceTL-PA411 Interface2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet TL-PA411 AV500 Mini Powerline Adapter Chapter 3 Installing Management Utility TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network Password is unnecessary to enter for renaming 4.2.1 Rename the Remote Device/Enter Password4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware 4.4.2 Reset Device To upgrade the devices firmware, follow these instructions4.4.3 Set All Devices’ Network Name 5.1 Pair Secure with 128 bits-AES Chapter 5 Advanced Feature How to Use the Pair Buttons5.2 Set Up a Powerline AV Network with the Pair Button Create a Powerline network using the Pair button：Leave an existing Powerline AV Network Join an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 2. The Ethernet LED does not light up. Ans. Check the following Appendix A Troubleshooting1. The Power LED does not light up. Ans. Check the following 3. The Powerline LED does not light up