TP-Link manual TL-PA411 AV500 Mini Powerline Adapter, Upgrade Firmware

Page 24

4.4.1 Upgrade Firmware

TL-PA411AV500 Mini Powerline Adapter

4.4.1 Upgrade Firmware

Click the Upgrade Firmware button to upgrade the version of the firmware for the adapter and the following dialog will pop up.

z

z

NVM: None-volatile memory. It is used for upgrading the firmware.

PIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes.

19

Image 24

Contents TL-PA411 AV500 Mini Powerline Adapter Rev 1910010651COPYRIGHT & TRADEMARKS FCC STATEMENT CE Mark WarningDECLARATION OF CONFORMITY Product Description AV500 Mini Powerline AdapterRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN ENCONTENTS Package ContentsChapter 4 Using the Management Utility Appendix A TroubleshootingPackage Contents TL-PA411 AV500 Mini Powerline AdapterChapter 1 Introduction 1.3 Important Safety Instructions1.1 Conventions 1.2 System Requirement¾ If liquid has been spilled on the product Chapter 2 Connecting Mechanism 2.2 LED Indicator2.1 Introduction Status2.3 Physical Interface TL-PA411Interface Description2.4 Connection Instruction 2.5 Hardware Connection - Computer2.6 Hardware Connection - Internet TL-PA411 AV500 Mini Powerline Adapter Chapter 3 Installing Management Utility TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter Chapter 4 Using the Management Utility 4.1 Status4.1.1 Set Local Device’s Network Name 4.2 Network 4.2.1 Rename the Remote Device/Enter Password Password is unnecessary to enter for renaming4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware To upgrade the devices firmware, follow these instructions 4.4.2 Reset Device4.4.3 Set All Devices’ Network Name Chapter 5 Advanced Feature How to Use the Pair Buttons 5.2 Set Up a Powerline AV Network with the Pair ButtonCreate a Powerline network using the Pair button： 5.1 Pair Secure with 128 bits-AESJoin an existing Powerline AV Network Leave an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged Appendix A Troubleshooting 1. The Power LED does not light up. Ans. Check the following3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following