TP-Link TL-PA411 AV500 Mini Powerline Adapter, Reset Device, Set All Devices’ Network Name

Page 25
To upgrade the device's firmware, follow these instructions:

TL-PA411AV500 Mini Powerline Adapter

If you want to upgrade the version of firmware for the device, please select appropriate Firmware and PIB files together. New firmware versions and PIB files are posted at www.tp-link.com and can be downloaded for free.

)Note:

The parameter information of PIB will restore to the factory defaults after resetting the PLC.

To upgrade the device's firmware, follow these instructions:

1.Download PIB file and firmware upgrade file from the TP-LINK website (www.tp-link.com).

2.Enter the path name or click 4.4.2 Reset Device to select the downloaded files on the computer into the corresponding blanks.

3.Click the OK button.

)Note:

Do not turn off the device while the firmware is being upgraded. The device will reboot after the Upgrading has been finished.

4.4.2 Reset Device

This Management Utility allows you to reset the Powerline Adapter to its default settings.

zReset Local Device: Click this button to reset the settings of the local Powerline Adapter device only.

zReset All Devices: Click this button to reset the settings of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network.

4.4.3Set All Devices’ Network Name

The Set All Devices’ Network Name button allows you to change the logical network of all devices that appear on the Network configuration homepage whose Device’s Password had been entered for the same logical network. A dialog window will appear to report the success of this operation.

All Powerline devices are shipped using a default logical network (network name), which is normally “HomePlugAV”.

To set all devices’ network name, please type the name in the field and click the Set Network Name to apply the setting.

)Note:

Every Powerline Adapter on your home network MUST have the same Network Password for connectivity to be established throughout your home.

20

Image 25
Contents Rev 1910010651 TL-PA411 AV500 Mini Powerline AdapterCOPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTProduct Description AV500 Mini Powerline Adapter DECLARATION OF CONFORMITYRd, Nanshan, Shenzhen, China EN EN EN 61000-3-22006+A12009+A22009 EN ENPackage Contents CONTENTSChapter 4 Using the Management Utility Appendix A TroubleshootingTL-PA411 AV500 Mini Powerline Adapter Package Contents1.3 Important Safety Instructions Chapter 1 Introduction1.1 Conventions 1.2 System Requirement¾ If liquid has been spilled on the product 2.2 LED Indicator Chapter 2 Connecting Mechanism2.1 Introduction StatusTL-PA411 2.3 Physical InterfaceInterface Description2.5 Hardware Connection - Computer 2.4 Connection Instruction2.6 Hardware Connection - Internet TL-PA411 AV500 Mini Powerline Adapter Chapter 3 Installing Management Utility TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter TL-PA411 AV500 Mini Powerline Adapter 4.1 Status Chapter 4 Using the Management Utility4.1.1 Set Local Device’s Network Name 4.2 Network Password is unnecessary to enter for renaming 4.2.1 Rename the Remote Device/Enter Password4.2.2 Add Device 4.3 Advanced 4.4 System 4.4.1 Upgrade Firmware 4.4.2 Reset Device To upgrade the devices firmware, follow these instructions4.4.3 Set All Devices’ Network Name 5.2 Set Up a Powerline AV Network with the Pair Button Chapter 5 Advanced Feature How to Use the Pair ButtonsCreate a Powerline network using the Pair button: 5.1 Pair Secure with 128 bits-AESLeave an existing Powerline AV Network Join an existing Powerline AV NetworkThe sequence of Step 1 and Step 2 can be exchanged 1. The Power LED does not light up. Ans. Check the following Appendix A Troubleshooting3. The Powerline LED does not light up 2. The Ethernet LED does not light up. Ans. Check the following