TP-Link manual TL-PA4010P AV500 Powerline Adapter With AC Pass Through

Page 1

TL-PA4010P

AV500 Powerline Adapter With AC Pass Through

Rev: 1.0.0 1910010757

Image 1

Contents TL-PA4010P AV500 Powerline Adapter With AC Pass Through Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsIntroduction Important Safety InstructionsSystem Requirement Status Indication LED IndicatorDescription Physical InterfaceTL-PA4010PAV500 Powerline Adapter With AC Pass Through Introduction Connecting MechanismConnection Instruction Hardware Connection Computer  Note Hardware Connection InternetInstalling Management Utility TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through Status Using the Management UtilitySet Local Device’s Network Name NetworkRename the Remote Device/Enter Password Add Device System AdvancedUpgrade Firmware Reset Device To upgrade the devices firmware, follow these instructionsSet All Devices’ Network Name Set Up a Secured Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonsCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AESLeave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a TroubleshootingPowerline LED does not light up Ethernet LED does not light up. Ans. Check the following