TP-Link TL-PA4010P manual Rename the Remote Device/Enter Password

Page 21

TL-PA4010PAV500 Powerline Adapter With AC Pass Through

Type: Displays the type of the remote device found in the network.

Name: Displays the name of the remote device found in the network. You can change its name

following two steps: select the desired adapter and click the Modify button.

MAC Address: Displays the MAC address of the remote device found in the network.

Password: Displays the supplied Powerline Adapter’s password (Initially left blank). To set the Powerline Adapter password (Which is required when creating a private network or managing all the devices), select the device shown in the figure and click the Modify button. Follow the pop-up dialog box to complete your password setting.

Rate: Shows the current transmission rate of the Powerline Adapter.

Rescan: Click the Rescan button to perform an immediate search of the remote Powerline Adapter. The Management Utility will automatically perform the scanning process and update the display every few seconds by default.

Option: Select the device and click the Modify button to display a configuration dialog. There you can change the corresponding adapter’s name and enter its password for future configuration.

4.2.1 Rename the Remote Device/Enter Password

You can change the name of the remote adapter to an easy-to-remember one. Additionally, you can select the desired adapter and enter its password (Take note of the password format) so as to set the network name of this device on System configuration homepage. To change the name of the remote adapter or enter its password, please follow the steps below:

(1) Select the desired device and click the Modify button to display the following dialog.

15

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TL-PA4010P AV500 Powerline Adapter With AC Pass Through Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsImportant Safety Instructions IntroductionSystem Requirement Status Indication LED IndicatorDescription Physical InterfaceTL-PA4010PAV500 Powerline Adapter With AC Pass Through Connecting Mechanism IntroductionConnection Instruction Hardware Connection Computer  Note Hardware Connection InternetInstalling Management Utility TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through Status Using the Management UtilitySet Local Device’s Network Name NetworkRename the Remote Device/Enter Password Add Device System AdvancedUpgrade Firmware To upgrade the devices firmware, follow these instructions Reset DeviceSet All Devices’ Network Name Set Up a Secured Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonsCreate a secured Powerline network using the Pair button： Pair Secure with 128 bits-AESLeave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a TroubleshootingPowerline LED does not light up Ethernet LED does not light up. Ans. Check the following
Top Page Image Contents