TP-Link TL-PA4010P manual Advanced, System

Page 23

TL-PA4010PAV500 Powerline Adapter With AC Pass Through

4.3 Advanced

The third tab window labeled “Advanced” is for Quality of Service. With the proper configuration, the limit bandwidth can be took full advantage. QoS requirements are different for various data types such as streaming video or music, voice and raw data. To provide higher QoS for streaming data, priority levels can be set using tags at the beginning of data frames. Virtual Local Area Network (Vlan) 802.1p priority tags on Ethernet frames are used to specify 8 (0~7) levels of “user priority”. Homeplug AV powerline allows for 4 levels of Channel Access Priority CAP 0-3). Therefore, the 8 levels of VLAN Ethernet tags must be mapped to the 4 levels of CAP priority, where CAP 3 is the highest priority and CAP 0 is the lowest. CAP 3 priority might be used for voice and network management frames, CAP 2 is used for streaming video while CAP 1 and CAP 0 are used for data. Mapping VLAN tags to CAP levels is easily done using the VLAN Priority Mapping function on the QoS tab window.

Simple Application Mapping: The group allows you to choose what type of traffic with the highest user priority you will use your local HomePlug device for by pitching one of the following radios. Please select the radio type according to your demand.

Advanced Priority Mapping: The group sets VLAN priority to CAP mapping and default priority. Note that in HomePlug, CAP 3 is the highest priority while CAP 0 is the lowest priority. The values shown in VLAN Tags Priority are the default settings for the first running.

4.4 System

The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all adapters’ network names.

17

Page 22 Page 24
Image 23
Page 22 Page 24
Contents TL-PA4010P AV500 Powerline Adapter With AC Pass Through Copyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Declaration of ConformityContents Conventions Package ContentsSystem Requirement Important Safety InstructionsIntroduction Status Indication LED IndicatorDescription Physical InterfaceTL-PA4010PAV500 Powerline Adapter With AC Pass Through Connection Instruction Connecting MechanismIntroduction Hardware Connection Computer  Note Hardware Connection InternetInstalling Management Utility TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through TL-PA4010PAV500 Powerline Adapter With AC Pass Through Status Using the Management UtilitySet Local Device’s Network Name NetworkRename the Remote Device/Enter Password Add Device System AdvancedUpgrade Firmware Set All Devices’ Network Name To upgrade the devices firmware, follow these instructionsReset Device Pair Secure with 128 bits-AES Advanced Feature How to Use the Pair ButtonsSet Up a Secured Powerline AV Network with the Pair Button Create a secured Powerline network using the Pair button：Leave an existing secured Powerline AV Network Join an existing secured Powerline AV NetworkEthernet LED does not light up. Ans. Check the following Appendix a TroubleshootingPower LED does not light up. Ans. Check the following Powerline LED does not light up
Top Page Image Contents